{"title":"All Lightsabers","description":"","products":[{"product_id":"ahsoka-tanos-rebels-lightsabers-no-72110","title":"Ahsoka Tano’s Rebels Lightsabers No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eAhsoka's weapons were a single-bladed lightsaber with a green blade, which was later accompanied by a shoto lightsaber with a yellow-green blade that she built upon taking up Jar'Kai during the latter half of the war. She often wielded her weapons in an unorthodox reverse grip.\u003cbr\u003e\nShe abandoned the lightsabers for good after Order 66, in order to fake her death to the new Galactic Empire, before eventually replacing them with a pair of white lightsabers upon joining the nascent rebellion.-Wookiepedia \u003c\/p\u003e\n\u003cp\u003eThese sabers will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect (ridges, bumps and small holes are possible). Each piece is to be printed and glued separately in black, gray and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eMain Hand\u003cbr\u003e\n11.5\" x .5\"\u003cbr\u003e\n2oz\u003cbr\u003e\nOff Hand\u003cbr\u003e\n7.25\" x.5\"\u003cbr\u003e\n1oz\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:1695805\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940016418975,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940016451743,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940016484511,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940016517279,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940016550047,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940016582815,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940016615583,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940016648351,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940016681119,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940016713887,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940016746655,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940016779423,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940016812191,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940016844959,"sku":"","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.3097153061_k5rn_c8de19b1-9e4f-473d-87a7-fd742884f376.jpg?v=1768594695"},{"product_id":"mortys-lightsaber-from-rick-and-morty-89200","title":"Rick and Morty's Lightsabers from Rick and Morty | In Color | Sound and Lights | 3D Printed | Lamp | Actual Electronic Lightsaber Lamp","description":"\u003cp\u003eYOU DROPPED IT PERFECTLY VERTICAL MORTY !!!\u003c\/p\u003e\n\u003cp\u003eIntroducing the Perfectly Vertical Lightsaber Desk Lamp – a one-of-a-kind collector's item inspired by the memorable \"Rick and Morty\" episode! Own a piece of intergalactic history with this meticulously crafted lightsaber prop that pays homage to the hilarious mishap in the underground lab.\u003c\/p\u003e\n\u003cp\u003eKey Features:\u003cbr\u003e\nAuthentic Design: Modeled after the lightsaber Morty dropped perfectly vertical, this desk lamp is a faithful recreation, capturing the essence of the iconic moment in the show.\u003cbr\u003e\nFunctional Art: Not just a collectible, this lightsaber prop serves as a fully functional desk lamp and even has sound! When set on your desk, it emits a mesmerizing glow, simulating the effect of burning through the surface – a unique and eye-catching addition to any workspace.\u003cbr\u003e\nQuality Craftsmanship: Expertly crafted with attention to detail, the lightsaber features intricate design elements, making it a must-have for \"Rick and Morty\" enthusiasts and sci-fi fans alike.\u003cbr\u003e\nDurable Construction: Built to last, the lightsaber is made from high-quality materials, ensuring longevity and a premium feel. It's not just a display piece; it's a conversation starter.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003cbr\u003e\nLength: 14\"\u003cbr\u003e\nMaterials: Plastic\u003cbr\u003e\nColor: Changes colors\u003c\/p\u003e\n\u003cp\u003eHow to Use:\u003cbr\u003e\nPlace the Perfectly Vertical Lightsaber Desk Lamp on your desk or tabletop.\u003cbr\u003e\nPower on the lamp to enjoy the immersive illumination, reminiscent of the iconic \"Rick and Morty\" episode.\u003cbr\u003e\nWatch as the lightsaber seemingly burns through your desk, creating a visually stunning effect.\u003cbr\u003e\nNote: This lightsaber desk lamp is a handmade prop inspired by the mentioned \"Rick and Morty\" episode and is intended for display and aesthetic purposes. It is not a functional lightsaber for combat or cutting.\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. It is 3D printed, so it won't look perfect (ridges, bumps and small holes are possible). Each piece is to be printed and glued separately in gold and silver. Color also may appear slightly different in pictures than the received item based on what is available to me at the time of printing. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars, HBO or Rick and Morty in any way. This is functional fan art. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Mystery Makers.\u003cbr\u003e\nhttps:\/\/www.patreon.com\/posts\/you-dropped-it-76156122\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Default Title","offer_id":44940085002399,"sku":"","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.6561040415_g0k3_5e070b38-8095-4fdc-a605-ca072d525af4.jpg?v=1768593857"},{"product_id":"shin-hati-lightsaber-working-light-up-03749","title":"Shin Hati Lightsaber | Working Light Up with Sound | Functional | No Paint Required | 3D Printed | Ahsoka | Lightsaber Display Mount","description":"\u003cp\u003eThis is a working lightsaber. Inside is an RGB core that lights up a blade like a flashlight. It even has sound!\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. It is 3D printed, so it won't look perfect (ridges, bumps and small holes are possible). Each piece is to be printed and glued separately in black, gray, red, and silver. \u003c\/p\u003e\n\u003cp\u003eThe core is an RGB core, not a Neo pixel core. It is also not compatible with Galaxy's Edge blades. The core can be changed to multiple colors and different sound profiles. An instruction booklet will teach you how to change the volume, color, and sounds. A charging cord is also included. \u003c\/p\u003e\n\u003cp\u003eChoose if you want a core and a blade or any other combination. The core is battery powered and an RGB base lit display. It measures 187mm (7.25in) long and 25mm (1in) thick. The blade is 81.3cm (32in) long and 25mm (1in) thick. If you choose to provide any of your own pieces instead of buying mine, they must meet these dimensions. Also, look closely at the switch in my photos to make sure if matches your core as well. \u003c\/p\u003e\n\u003cp\u003eThis is not a combat-ready item. This item is intended to be used as a cosplay item. Using it for role play or just hitting it could break the item, so please be careful. I'm not responsible for the item breaking if you aren't using it responsibly. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested it before posting it to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, that this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Mystery Makers\u003cbr\u003e\nhttps:\/\/www.patreon.com\/mysterymakers\/posts\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"No Blade or Core \/ 0-No Stand","offer_id":44940085100703,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"No Blade or Core \/ 1-Desk Display","offer_id":44940085133471,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"No Blade or Core \/ 2-Desk Display","offer_id":44940085166239,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"No Blade or Core \/ 3-Desk Display","offer_id":44940085199007,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"No Blade or Core \/ 4-Desk Display","offer_id":44940085231775,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"No Blade or Core \/ 5-Wall Display","offer_id":44940085264543,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"No Blade or Core \/ 6-Wall Display","offer_id":44940085297311,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 0-No Stand","offer_id":44940085330079,"sku":"","price":85.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 1-Desk Display","offer_id":44940085362847,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 2-Desk Display","offer_id":44940085395615,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 3-Desk Display","offer_id":44940085428383,"sku":"","price":105.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 4-Desk Display","offer_id":44940085461151,"sku":"","price":105.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 5-Wall Display","offer_id":44940085493919,"sku":"","price":105.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 6-Wall Display","offer_id":44940085526687,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 0-No Stand","offer_id":44940085559455,"sku":"","price":85.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 1-Desk Display","offer_id":44940085592223,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 2-Desk Display","offer_id":44940085624991,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 3-Desk Display","offer_id":44940085657759,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 4-Desk Display","offer_id":44940085690527,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 5-Wall Display","offer_id":44940085723295,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 6-Wall Display","offer_id":44940085756063,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 0-No Stand","offer_id":44940085788831,"sku":"","price":115.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 1-Desk Display","offer_id":44940085821599,"sku":"","price":125.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 2-Desk Display","offer_id":44940085854367,"sku":"","price":125.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 3-Desk Display","offer_id":44940085887135,"sku":"","price":135.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 4-Desk Display","offer_id":44940085919903,"sku":"","price":135.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 5-Wall Display","offer_id":44940085952671,"sku":"","price":135.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 6-Wall Display","offer_id":44940085985439,"sku":"","price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.5430090735_5rwq_70dcb5c8-ab1f-476d-b974-42431ce955ef.jpg?v=1768594680"},{"product_id":"collapsable-darksaber-no-paint-required-90212","title":"Collapsible Darksaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003e🌌 Unleash the Power of the Dark Side with our Collapsible Darksaber Lightsaber! 🌌\u003c\/p\u003e\n\u003cp\u003eIntroducing the ultimate toy for all, now within your grasp. Our Collapsible Darksaber Lightsaber brings the iconic saber from the Star Wars universe to life like never before. Crafted for both collectors and aspiring Jedi\/Sith warriors, this remarkable piece combines nostalgia with cutting-edge technology.\u003c\/p\u003e\n\u003cp\u003e🔥 Seamless Extension and Retraction 🔥\u003cbr\u003e\nExperience the thrill of wielding the Darksaber with ease. Our lightsaber's blade extends and retracts effortlessly, just like the classic lightsaber toys you grew up with. Embrace the dark side or bask in the light at a moment's notice.\u003c\/p\u003e\n\u003cp\u003e🌟 Iconic Design, Unparalleled Realism 🌟\u003cbr\u003e\nThe Darksaber is an emblem of power and authority, and we've meticulously recreated its design to capture every detail. From the unique hilt to the dark, pulsating blade, this lightsaber is a true work of art that will leave every Star Wars fan in awe.\u003c\/p\u003e\n\u003cp\u003eThis is a large item at about 16\" long. \u003c\/p\u003e\n\u003cp\u003eThis is a toy, but shouldn't be treated as such. Meaning, because it is 3D printed it is not meant to withstand duels or hard use. This is more of a novelty item that is meant for display. Kids are more likely to use it harder than it is meant to be used. Please use caution when lending it to others. \u003c\/p\u003e\n\u003cp\u003eTo ensure its longevity, please do not push the blade into the ground to collapse it. Instead, use your hand to guide it back into the hilt. Start with the lower, thicker, white part of the blade first. If you push it in from the end starting with the tip, it’s likely to get stuck, and it will not come out again.\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Nikko Industries.\u003cbr\u003e\nhttps:\/\/nikkoindustriesmembership.com\/product\/collapsing-dark-saber\/\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Default Title","offer_id":44940087034015,"sku":"","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.5324937535_cdj5.jpg?v=1768593661"},{"product_id":"burryagas-lightsaber-from-the-high-23625","title":"Burryaga's Lightsaber from the High Republic | No Paint Required | 3D Printed | Galaxy's Edge | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eBurryaga's lightsaber of Wookiee Jedi Padawan Burryaga Agaburry was a single-bladed crossguard lightsaber with a blue blade powered by a kyber crystal. The lightsaber's hilt was plated in meryx the amber of the white wroshyr tree which had been extinct for millennia, wrapped in the leather of a tach, and was finished off with a pure electrum crosspiece. It was specially crafted to be used by a tall Wookiee, and as such was one of the longest lightsabers used by the Jedi Order..-Wookiepedia \u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect (ridges, bumps and small holes are possible). Each piece is to be printed and glued separately in black, brown, copper, gold, and silver. \u003c\/p\u003e\n\u003cp\u003eCompletely assembled this lightsaber is 27\" tall and 12\" wide. Due to this being a very large (and extremely cool!) saber, it cannot be shipped in its completed form. Shipping something this large is too expensive. So, this will only be offered in its unassembled form and semi-assembled. Thankfully, it's a very easy build as the instructions are straightforward and require very little glue (gorilla glue gel is the best for me). Keep this in mind before ordering. \u003c\/p\u003e\n\u003cp\u003eSemi-assembled it will come in 5 parts that will need some superglue to hold in place. See picture #8 to understand how it is shipped together. Picture #7 will show you the assembly guide. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:6008124\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Semi-Assembled \/ 0-No Stand","offer_id":44940087296159,"sku":"","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Assembled \/ 1-Desk Display","offer_id":44940087328927,"sku":"","price":64.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Assembled \/ 2-Desk Display","offer_id":44940087361695,"sku":"","price":64.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Assembled \/ 3-Desk Display","offer_id":44940087394463,"sku":"","price":64.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Assembled \/ 4-Desk Display","offer_id":44940087427231,"sku":"","price":64.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Assembled \/ 5-Wall Display","offer_id":44940087459999,"sku":"","price":64.0,"currency_code":"USD","in_stock":true},{"title":"Semi-Assembled \/ 6-Wall Display","offer_id":44940087492767,"sku":"","price":64.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940087525535,"sku":"","price":44.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940087558303,"sku":"","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940087591071,"sku":"","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940087623839,"sku":"","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940087656607,"sku":"","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940087689375,"sku":"","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940087722143,"sku":"","price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.4928002051_7dji.jpg?v=1768593449"},{"product_id":"plo-koons-lightsaber-no-paint-required-90824","title":"Plo Koon's Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003ePlo Koon's lightsaber was the personal blue-bladed lightsaber of Jedi Council member Master Plo Koon. He used it during many campaigns in the Clone Wars against the Confederacy of Independent Systems. The design of Koon's lightsaber was quite common among Jedi who saw themselves as sentinels. -Wookiepedia\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. It does NOT need to be painted. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in black, red, green and, silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:2016141\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940088541343,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940088574111,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940088606879,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940088639647,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940088672415,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940088705183,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940088737951,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940088770719,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940088803487,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940088836255,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940088869023,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940088901791,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940088934559,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940088967327,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.4719585067_phcl.jpg?v=1768593969"},{"product_id":"avar-kriss-lightsaber-from-the-high-77323","title":"Avar Kriss' Lightsaber from the High Republic | No Paint Required | 3D Printed | Galaxy's Edge | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eJedi Master Avar Kriss utilized a green-bladed crossguard lightsaber. The weapon's hilt was sheathed in silver-white electrum, with a spiralling grip of incised green seastone, and had a physical crossguard at one end.-Wookiepedia \u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect (ridges, bumps and small holes are possible). Each piece is to be printed and glued separately in gold and silver. Color also may appear slightly different in pictures than the received item base on what is available to me at the time of printing. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003cbr\u003e\nhttps:\/\/www.thingiverse.com\/thing:5644979\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940089163935,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940089196703,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940089229471,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940089262239,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940089295007,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940089327775,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940089360543,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940089393311,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940089426079,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940089458847,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940089491615,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940089524383,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940089557151,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940089589919,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.4356705646_flqj_da2efa28-9e5a-4ebf-948c-b57b94fb3d60.jpg?v=1768593143"},{"product_id":"tera-sinubes-lightsaber-no-paint-31649","title":"Tera Sinube's Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eExclusively offered here only by CaseStudyno8!\u003c\/p\u003e\n\u003cp\u003eTera Sinube's lightsaber was the personal lightsaber of the Cosian Jedi Master Tera Sinube, which was a cane lightsaber—a specialized device that was also a walking stick—due to his advanced age. Designed to be as much of a weapon as a reinforcement for his gnarled frame, Sinube only exposed the duplicity of his stick when armed combat was the necessary course of action. -Wookiepedia\u003c\/p\u003e\n\u003cp\u003eThis saber can stand in the cane formation or can be removed in the lightsaber form. \u003c\/p\u003e\n\u003cp\u003eCompletely assembled this sabercane is 36\" tall. The saber itself is 16\" tall and 8\" wide. Due to this being a very odd (and extremely cool!) saber, it cannot be shipped in its completed form. Shipping something this oddly shaped is too expensive. So, this will only be offered in its unassembled form. Thankfully, it's a very easy build as the instructions are straight forward and require very little glue (gorilla glue gel is the best for me). Some parts are a bit tight, but can be hammed in place (I recommend a rubber mallet just to be careful, but any hammer will work). Keep this in mind before ordering. \u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in red, brown and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission exclusively from Brad Harris, CaseStudyno8\u003cbr\u003e\nhttps:\/\/www.thingiverse.com\/thing:5611657\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Semi-Assembled","offer_id":44940089852063,"sku":"","price":64.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled","offer_id":44940089884831,"sku":"","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.4370503179_gl6n.jpg?v=1768593455"},{"product_id":"ki-adi-mundis-lightsaber-no-paint-84534","title":"Ki-Adi Mundi's Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eKi-Adi-Mundi's lightsaber was the personal lightsaber of Jedi Master Ki-Adi-Mundi. He used it during many campaigns in the Clone Wars against the Separatist Droid Army including the first and the second battles of Geonosis. Mundi continued using his lightsaber until his death during the Fourth Battle of Mygeeto as the result of Order 66 -Wookiepedia \u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect (ridges, bumps and small holes are possible). Each piece is to be printed and glued separately in black, gray and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:1722937\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940090638495,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940090671263,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940090704031,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940090736799,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940090769567,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940090802335,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940090835103,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940090867871,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940090900639,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940090933407,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940090966175,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940090998943,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940091031711,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940091064479,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.4162261016_8zm4.jpg?v=1768594688"},{"product_id":"asajj-ventress-padawan-lightsaber-no-71264","title":"Asajj Ventress' Padawan Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eVentress was shown wielding this saber in a brief flash back to her days is a Jedi Padawan under the tutelage of Jedi knight Ky Narec. -Star Wars, the lightsaber collection\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect (ridges, bumps and small holes are possible). Each piece is to be printed and glued separately in black, gray and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:2243130\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940091490463,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940091523231,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940091555999,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940091588767,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940091621535,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940091654303,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940091687071,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940091719839,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940091752607,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940091785375,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940091818143,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940091850911,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940091883679,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940091916447,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.4205973805_9ske.jpg?v=1768594304"},{"product_id":"barriss-offees-lightsaber-no-paint-68656","title":"Barriss Offee's Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eDuring the Clone Wars, Barriss Offee carried this blue-bladed lightsaber as her personal weapon. She wielded it on many battlefronts, notably during the Second Battle of Geonosis.\u003cbr\u003e\nBarriss continued to carry her blue lightsaber until her fall to the dark side of the Force in 19 BBY, where she bombed the Jedi Temple and framed her close friend Ahsoka Tano for the deed. -Wookiepedia \u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect (ridges, bumps and small holes are possible). Each piece is to be printed and glued separately in black, gray and silver. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:2243130\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940092571807,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940092604575,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940092637343,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940092670111,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940092702879,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940092735647,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940092768415,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940092801183,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940092833951,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940092866719,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940092899487,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940092932255,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940092965023,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940092997791,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.4205973805_9ske_b7ac2de1-73ba-42c3-b894-0e7abe947b6e.jpg?v=1768595113"},{"product_id":"shaak-tis-lightsaber-no-paint-required-78132","title":"Shaak Ti's Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eShaak Ti wielded her lightsaber throughout the Clone Wars, starting with the First Battle of Geonosis.\u003cbr\u003e\nShaak Ti was sent to protect Supreme Chancellor Palpatine from General Grievous during the invasion of Coruscant . Ti managed to fight Grievous, however, he got the upper hand by electrocuting Ti with electric cables, knocking the Jedi unconscious. Grievous took Ti's lightsaber as a trophy and escaped Coruscant.\u003cbr\u003e\n He used it against Jedi Master Obi-Wan Kenobi during his final duel on Utapau but lost it when the hand wielding the saber was cut off by Kenobi.-Wookiepedia \u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect (ridges, bumps and small holes are possible). Each piece is to be printed and glued separately in black, gray and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:2243130\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940093161631,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940093194399,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940093227167,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940093259935,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940093292703,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940093325471,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940093358239,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940093391007,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940093423775,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940093456543,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940093489311,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940093522079,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940093554847,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940093587615,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.6614717347_3yiq_6d386217-f305-4b4a-8963-d513d8ca7383.jpg?v=1768593046"},{"product_id":"stormtrooper-lightsaber-no-paint-88530","title":"Stormtrooper Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eStormtrooper lightsabers were used exclusively by Cuis Clones. They were red-bladed and, unlike other sabers, had a predominantly white hilt that matched their armor. -Wookiepedia\u003c\/p\u003e\n\u003cp\u003eOriginating from the short story \"A Two-Edged Sword\" first seen in Star Wars Insider magazine #85 in 2005 where a series of force-sensitive clones were trained as a special corps of stormtroopers who wielded these lightsabers.\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. Choose if you want it assembled or not. Each piece is to be printed and glued separately in white, black, and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003e10\"x2\"\u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003cbr\u003e\nhttps:\/\/www.thingiverse.com\/thing:5377195\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Display","offer_id":44940094931103,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940094963871,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940094996639,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940095029407,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940095062175,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940095094943,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940095127711,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Display","offer_id":44940095160479,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940095193247,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940095226015,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940095258783,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940095291551,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940095324319,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940095357087,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.3918485133_k80g.jpg?v=1768594812"},{"product_id":"kyle-katarn-lightsaber-no-paint-02518","title":"Kyle Katarn Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Legends | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eThis lightsaber was created and used by Jedi Battlemaster Kyle Katarn after he joined the Jedi Praxeum on Yavin 4. He later left it behind when he abandoned the Jedi, only to take it up again during the Empire Reborn crisis. -Wookiepedia\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. It does NOT need to be painted. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in black, gray, red and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003e14”x2”\u003cbr\u003e\n5 oz or 145 g\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:4964013\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940095848607,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940095881375,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940095914143,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940095946911,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940095979679,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940096012447,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940096045215,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940096077983,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940096110751,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940096143519,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940096176287,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940096209055,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940096241823,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940096274591,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.3931225493_1lqy_fa1c1768-8712-4e8f-8657-c690ca879326.jpg?v=1768594413"},{"product_id":"darth-maul-lightsaber-no-paint-48904","title":"Darth Maul Lightsaber  | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eThe Dark Lord of the Sith Darth Maul wielded a red double-bladed lightsaber. After it was cut in half in 32 BBY, it became a single-bladed lightsaber.\u003c\/p\u003e\n\u003cp\u003eHe reforged the end of his original lightsaber into a second blade to create another double-bladed weapon which he used during his duel with Ahsoka Tano during the Siege of Mandalore. During the battle, Ahsoka caused him to drop both to the depths of the city-Wookiepedia\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. It does NOT need to be painted. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in black, red and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003e11\"x3\" for a single blade\u003cbr\u003e\n22\" for a double sided blade\u003cbr\u003e\n5 oz or 145 g\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:1677809\u003cbr\u003e\nhttps:\/\/www.thingiverse.com\/thing:4849038\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Single \/ 0-No Stand","offer_id":44940096766111,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Single \/ 1-Desk Display","offer_id":44940096798879,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Single \/ 2-Desk Display","offer_id":44940096831647,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Single \/ 6-Wall Display","offer_id":44940096864415,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Dual \/ 0-No Stand","offer_id":44940096897183,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Dual \/ 1-Desk Display","offer_id":44940096929951,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Dual \/ 2-Desk Display","offer_id":44940096962719,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Dual \/ 6-Wall Display","offer_id":44940096995487,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Assembled S7+OG \/ 0-No Stand","offer_id":44940097028255,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Assembled S7+OG \/ 1-Desk Display","offer_id":44940097061023,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Assembled S7+OG \/ 2-Desk Display","offer_id":44940097093791,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Assembled S7+OG \/ 6-Wall Display","offer_id":44940097126559,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Single \/ 0-No Stand","offer_id":44940097159327,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Single \/ 1-Desk Display","offer_id":44940097192095,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Single \/ 2-Desk Display","offer_id":44940097224863,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Single \/ 6-Wall Display","offer_id":44940097257631,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Dual \/ 0-No Stand","offer_id":44940097290399,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Dual \/ 1-Desk Display","offer_id":44940097323167,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Dual \/ 2-Desk Display","offer_id":44940097355935,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Dual \/ 6-Wall Display","offer_id":44940097388703,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled S7+OG \/ 0-No Stand","offer_id":44940097421471,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled S7+OG \/ 1-Desk Display","offer_id":44940097454239,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled S7+OG \/ 2-Desk Display","offer_id":44940097487007,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled S7+OG \/ 6-Wall Display","offer_id":44940097519775,"sku":"","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.3602993221_4gc5_06bd1084-cc6f-4753-ac30-e3e36b0c25c3.jpg?v=1768594819"},{"product_id":"taron-malicos-lightsaber-no-paint-68697","title":"Taron Malicos’ Lightsaber  | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eTaron Malicos's lightsabers were two lightsabers used by fallen Jedi Taron Malicos. He made use of them in his duel against Cal Kestis on Dathomir.\u003c\/p\u003e\n\u003cp\u003eThese sabers will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect (ridges, bumps and small holes are possible). Each piece is to be printed and glued separately in black, gold and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way.\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940097749151,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940097781919,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940097814687,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940097847455,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940097880223,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Desk Display","offer_id":44940097912991,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Desk Display","offer_id":44940097945759,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940097978527,"sku":"","price":20.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940098011295,"sku":"","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940098044063,"sku":"","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940098076831,"sku":"","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940098109599,"sku":"","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Desk Display","offer_id":44940098142367,"sku":"","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Desk Display","offer_id":44940098175135,"sku":"","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.3412051449_bq97_0be55afe-80d3-4c8c-99c2-7e4bbfe57350.jpg?v=1768593706"},{"product_id":"revans-lightsaber-knights-of-the-old-16631","title":"Revan's Lightsaber | Knights of the Old Republic | No Paint Required | 3D Printed | Galaxy's Edge | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eRevan constructed this lightsaber during his retraining, and made it with a blue blade. After the defeat of Darth Malak, Revan changed his blade's color to green, using this until his capture by the Sith Emperor.\u003cbr\u003e\nRevan's Sith lightsaber was the weapon used by the Jedi-turned-Sith Lord Darth Revan. He used it before and during his reign as the Dark Lord of the Sith. It was destroyed when Darth Malak fired on his Master's ship.-Wookiepedia \u003c\/p\u003e\n\u003cp\u003eThese sabers will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect (ridges, bumps and small holes are possible). Each piece is to be printed and glued separately in black, gray and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in either Green, Blue, Red or Purple. Please specify in the Personalization field. If you want something different, please let me know.\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:1735267\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Jedi \/ 0-No Stand","offer_id":44940098470047,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Jedi \/ 1-Desk Stand","offer_id":44940098502815,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Jedi \/ 2-Desk Stand","offer_id":44940098535583,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Jedi \/ 3-Desk Stand","offer_id":44940098568351,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Jedi \/ 4-Desk Stand","offer_id":44940098601119,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Jedi \/ 5-Wall Stand","offer_id":44940098633887,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Jedi \/ 6-Wall Stand","offer_id":44940098666655,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Sith \/ 0-No Stand","offer_id":44940098699423,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Sith \/ 1-Desk Stand","offer_id":44940098732191,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Sith \/ 2-Desk Stand","offer_id":44940098764959,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Sith \/ 3-Desk Stand","offer_id":44940098797727,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Sith \/ 4-Desk Stand","offer_id":44940098830495,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Sith \/ 5-Wall Stand","offer_id":44940098863263,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Sith \/ 6-Wall Stand","offer_id":44940098896031,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Both \/ 0-No Stand","offer_id":44940098928799,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Both \/ 1-Desk Stand","offer_id":44940098961567,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Both \/ 2-Desk Stand","offer_id":44940098994335,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Both \/ 3-Desk Stand","offer_id":44940099027103,"sku":"","price":85.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Both \/ 4-Desk Stand","offer_id":44940099059871,"sku":"","price":85.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Both \/ 5-Wall Stand","offer_id":44940099092639,"sku":"","price":85.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Both \/ 6-Wall Stand","offer_id":44940099125407,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Jedi \/ 0-No Stand","offer_id":44940099158175,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Jedi \/ 1-Desk Stand","offer_id":44940099190943,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Jedi \/ 2-Desk Stand","offer_id":44940099223711,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Jedi \/ 3-Desk Stand","offer_id":44940099256479,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Jedi \/ 4-Desk Stand","offer_id":44940099289247,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Jedi \/ 5-Wall Stand","offer_id":44940099322015,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Jedi \/ 6-Wall Stand","offer_id":44940099354783,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Sith \/ 0-No Stand","offer_id":44940099387551,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Sith \/ 1-Desk Stand","offer_id":44940099420319,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Sith \/ 2-Desk Stand","offer_id":44940099453087,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Sith \/ 3-Desk Stand","offer_id":44940099485855,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Sith \/ 4-Desk Stand","offer_id":44940099518623,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Sith \/ 5-Wall Stand","offer_id":44940099551391,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Sith \/ 6-Wall Stand","offer_id":44940099584159,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Both \/ 0-No Stand","offer_id":44940099616927,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Both \/ 1-Desk Stand","offer_id":44940099649695,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Both \/ 2-Desk Stand","offer_id":44940099682463,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Both \/ 3-Desk Stand","offer_id":44940099715231,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Both \/ 4-Desk Stand","offer_id":44940099747999,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Both \/ 5-Wall Stand","offer_id":44940099780767,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Both \/ 6-Wall Stand","offer_id":44940099813535,"sku":"","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.3227601749_hjdg.jpg?v=1768594497"},{"product_id":"kylo-rens-lightsaber-no-paint-required-15612","title":"Kylo Ren's Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eKylo Ren's lightsaber was a crossguard lightsaber wielded by Kylo Ren, Supreme Leader of the First Order and master of the Knights of Ren. The lightsaber was previously Ben Solo's lightsaber, constructed by Ren in his life as Ben Solo while training as a Jedi Padawan under his uncle, the Jedi Master Luke Skywalker. Originally the weapon had a blue blade, but after his destruction of the Jedi Temple and fall to the dark side in 28 ABY, Ren modified it into one with a red blade. The modified lightsaber incorporated a crossguard hilt based on an ancient design dating back to the Great Scourge of Malachor and contained a cracked Kyber crystal, requiring it to have lateral vents on either side of the handle in order to divert the extra heat generated by the crystal.\u003c\/p\u003e\n\u003cp\u003eThis saber will come in black pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003e18\"x3\"\u003cbr\u003e\n5 oz or 145 g\u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from 3Demon\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/3d-mon.com\/3d-model\/groupe\/male3dprintmodel\/kylo-ren-lightsaber\/\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940099977375,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940100010143,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940100042911,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940100075679,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940100108447,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940100141215,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940100173983,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940100206751,"sku":"","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940100239519,"sku":"","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940100272287,"sku":"","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940100305055,"sku":"","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940100337823,"sku":"","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940100370591,"sku":"","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940100403359,"sku":"","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.6668791108_2eou.jpg?v=1768593713"},{"product_id":"darth-vaders-lightsaber-3d-printed-43576","title":"Darth Vader’s Lightsaber | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eDarth Vader’s lightsaber was equipped with a dual-phase function, allowing the blade’s length to be manually controlled and altered in combat. The weapon featured a black-ridged handgrip, black power cell chamber, beveled emitter shroud, two dual-phase focusing crystals, high-output diatium power cell; and customary power and length adjustment knobs. Darth Vader was constantly fine-tuning and upgrading his lightsaber for maximum blade power and stability. -Wookiepedia\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in black and silver. \u003c\/p\u003e\n\u003cp\u003eThis is NOT the bouquet version. If you want that version, please order it specifically from the right listing. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:1263192\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940100468895,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940100501663,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940100534431,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940100567199,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940100599967,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940100632735,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940100665503,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940100698271,"sku":"","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940100731039,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940100763807,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940100796575,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940100829343,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940100862111,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940100894879,"sku":"","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.2975311683_o3vj_3af0d879-b8ee-490c-8023-c6529b8ec49f.jpg?v=1768594314"},{"product_id":"quinlan-vos-lightsaber-no-paint-68097","title":"Quinlan Vos Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eQuinlan Vos constructed his green bladed lightsaber while under the tutelage of Jedi Master Tholme. Vos' lightsaber inspired Obi-Wan Kenobi to make his own lightsaber bear a small resemblance to it beside Kenobi's own mentor, Qui-Gon Jinn. Vos wielded his lightsaber aggressively, and used it during the Yinchorri Uprising in 33 BBY, along with his master. After becoming a Jedi Knight, Vos continued to use the lightsaber, even during the Clone Wars. -Wookiepedia\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. It does NOT need to be painted. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in black, red and silver. The center part is split but glued together for ease of printing and to improve printing results.\u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:2243192\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Display","offer_id":44940101058719,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940101091487,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940101124255,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940101157023,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940101189791,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940101222559,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940101255327,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Display","offer_id":44940101288095,"sku":"","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940101320863,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940101353631,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940101386399,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940101419167,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940101451935,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940101484703,"sku":"","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.3223845701_kp51.jpg?v=1768593719"},{"product_id":"obi-wan-kenobis-ep-34-lightsaber-no-25905","title":"Obi-Wan Kenobi's Ep. 3\u00264 Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eObi-Wan Kenobi’s third lightsaber was the third, and final, lightsaber to be constructed and wielded by Jedi Master Obi-Wan Kenobi during the Clone Wars after he lost his second one prior to the First Battle of Geonosis. He used the lightsaber in a duel with General Grievous, but he lost it and was eventually given it back by CC-2224. He would also use this lightsaber to duel his fallen apprentice Darth Vader on Mustafar, and would continue to wield the weapon during his 19-year exile on Tatooine up until his death at the hands of Vader during their rematch on the Death Star. Obi-Wan’s second apprentice Luke Skywalker would later use this weapon’s design as a basis for the construction of his second lightsaber.\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. It does NOT need to be painted. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in black, gray and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:1839833\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940101714079,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940101746847,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940101779615,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940101812383,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940101845151,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940101877919,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940101910687,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940101943455,"sku":"","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940101976223,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940102008991,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940102041759,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940102074527,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940102107295,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940102140063,"sku":"","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.2818565008_pcac.jpg?v=1768594194"},{"product_id":"rey-skywalker-lightsaber-it-opens-no-34029","title":"Rey Skywalker Lightsaber | IT OPENS! | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk\/Wall","description":"\u003cp\u003eRey's lightsaber was built of salvaged materials from the maker's quarterstaff and a cloth handgrip. The weapon had a kyber crystal at its heart, and emitted a yellow-colored plasma blade when ignited. The emitter matrix on Rey's weapon featured a rotating gear-like mechanism, which caused the emitter of the lightsaber to open up and allow the plasma blade through. Wookiepedia\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces of black, brown and tan. Choose if you want it assembled or not, with or without the “wrapping” on the grip. \u003c\/p\u003e\n\u003cp\u003eThe top emitter teeth opens with a twist of the rotator platform. The emitter then slightly rises out. \u003c\/p\u003e\n\u003cp\u003eThe saber is 3D printed, so it won't look perfect, but I strive for great quality. Each piece is to be printed and glued separately in black, brown and tan. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003e12\"x3\"\u003cbr\u003e\n5 oz or 145 g\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:4152448\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940102271135,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940102303903,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940102336671,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940102369439,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940102402207,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940102434975,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940102467743,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Kit \/ 0-No Stand","offer_id":44940102500511,"sku":"","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Kit \/ 1-Desk Display","offer_id":44940102533279,"sku":"","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Kit \/ 2-Desk Display","offer_id":44940102566047,"sku":"","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Kit \/ 3-Desk Display","offer_id":44940102598815,"sku":"","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Kit \/ 4-Desk Display","offer_id":44940102631583,"sku":"","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Kit \/ 5-Wall Display","offer_id":44940102664351,"sku":"","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Kit \/ 6-Wall Display","offer_id":44940102697119,"sku":"","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.2769105940_6qwz_5c0c52b8-d1aa-4d70-8298-3abeef190e73.jpg?v=1768594616"},{"product_id":"luke-skywalkers-second-lightsaber-no-09120","title":"Luke Skywalker's Second Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge |Return of the Jedi |Lightsaber Display Mount Desk, Wall","description":"\u003cp\u003eLuke Skywalker's green lightsaber was a Jedi lightsaber constructed by Jedi Knight Luke Skywalker during the Galactic Civil War. It was modeled on the third lightsaber of Jedi Master Obi-Wan Kenobi, though its kyber crystal emitted a green plasma blade.\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in Gold and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003e12\"x3\"\u003cbr\u003e\n5 oz or 145 g\u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:1263192\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940102992031,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940103024799,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940103057567,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940103090335,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940103123103,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940103155871,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940103188639,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940103221407,"sku":"","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940103254175,"sku":"","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940103286943,"sku":"","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940103319711,"sku":"","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940103352479,"sku":"","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940103385247,"sku":"","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940103418015,"sku":"","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.2874382485_jckl_75e69f50-efa8-4b10-8183-bac3be0a1447.jpg?v=1768594518"},{"product_id":"gungis-lightsaber-no-paint-required-00086","title":"Gungi's Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eGungi's lightsaber was the personal lightsaber of the Wookiee Jedi youngling Gungi. The weapon was constructed out of wood from a Brylark tree and emitted a green blade. It was built aboard the Paladin-class corvette Crucible in the year 20 BBY. -Wookiepedia\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in brown and silver. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003e12\"x3\"\u003cbr\u003e\n5 oz or 145 g\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from 3Demon\u003cbr\u003e\nhttps:\/\/3d-mon.com\/3d-model\/groupe\/male3dprintmodel\/gungis-lightsaber\/\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940103614623,"sku":"","price":44.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940103647391,"sku":"","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940103680159,"sku":"","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940103712927,"sku":"","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940103745695,"sku":"","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940103778463,"sku":"","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940103811231,"sku":"","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940103843999,"sku":"","price":34.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940103876767,"sku":"","price":44.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940103909535,"sku":"","price":44.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940103942303,"sku":"","price":44.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940103975071,"sku":"","price":44.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940104007839,"sku":"","price":44.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940104040607,"sku":"","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.7261903516_n9mw_6c7a9ee2-4258-40db-9cf6-f5857669a5e6.jpg?v=1768594947"},{"product_id":"the-darksaber-no-paint-required-3d-15754","title":"The Darksaber  | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003e“Legend tells that it was created over a thousand years ago by Tarre Vizsla, the first Mandalorian ever inducted into the Jedi Order. After his passing, the Jedi kept the saber in their temple. That was until members of House Vizsla snuck in and liberated it. They used the saber to unify the people and strike down those who would oppose them. At one time, they ruled all of Mandalore wielding this blade. This saber is an important symbol to that house and respected by the other clans.”\u003cbr\u003e\nFENN RAU to Legend tells that it was created over a thousand years ago by Tarre Vizsla, the first Mandalorian ever inducted into the Jedi Order. After his passing, the Jedi kept the saber in their temple. That was until members of House Vizsla snuck in and liberated it. They used the saber to unify the people and strike down those who would oppose them. At one time, they ruled all of Mandalore wielding this blade. This saber is an important symbol to that house and respected by the other clans.\u003cbr\u003e\nFENN RAU to KANAN JARRUS, Star Wars Rebels\u003c\/p\u003e\n\u003cp\u003eThis saber will come either assembled or unassembled in Galaxy Black PLA plastic. It is 3D printed, so it won't look perfect. Each piece is printed and glued, if so chosen. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:2188594\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940104138911,"sku":"","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940104171679,"sku":"","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940104204447,"sku":"","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940104237215,"sku":"","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940104269983,"sku":"","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940104302751,"sku":"","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940104335519,"sku":"","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940104368287,"sku":"","price":27.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940104401055,"sku":"","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940104433823,"sku":"","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940104466591,"sku":"","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940104499359,"sku":"","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940104532127,"sku":"","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940104564895,"sku":"","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.2730151170_olgi_c9e8b2c9-4317-40e9-9a81-834bb3b1579a.jpg?v=1768594844"},{"product_id":"ezra-bridgers-3rd-lightsaber-no-32237","title":"Ezra Bridger’s 3rd Lightsaber | No Paint Required | 3D Printed | Rebels | Sabine | Ahsoka | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eDuring the New Republic Era, the Bokken Jedi Ezra Bridger built a new blue-bladed lightsaber with the help of Huyang in order to replace his previous green-bladed one which he had gifted to his friend, Sabine Wren. -Wookiepedia \u003c\/p\u003e\n\u003cp\u003eInside the saber, you will find a blue kyber crystal in its chamber as well as a simulated power pack. These additions make this saber unique to most out there. \u003c\/p\u003e\n\u003cp\u003eThis is a non-functional saber that will not light up or make a sound. \u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in black and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from 3D-mon\u003cbr\u003e\nhttps:\/\/3d-mon.com\/3d-model\/groupe\/male3dprintmodel\/ezra-bridgers-third-lightsaber-ahsoka\/\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940104695967,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940104728735,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940104761503,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940104794271,"sku":"","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940104827039,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940104859807,"sku":"","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940104892575,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940104925343,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940104958111,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940104990879,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940105023647,"sku":"","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940105056415,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940105089183,"sku":"","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940105121951,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.5392684142_tsul.jpg?v=1768593132"},{"product_id":"baylan-skolls-lightsaber-working-73611","title":"Baylan Skoll’s Lightsaber | Working Light Up with Sound | Functional | No Paint Required | 3D Printed | Ahsoka | Lightsaber Display Mount","description":"\u003cp\u003eThis is a working lightsaber. Inside is an RGB core that lights up a blade like a flashlight. It even has sound!\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect (ridges, bumps and small holes are possible). Each piece is to be printed and glued separately in black, gray, red, and silver. \u003c\/p\u003e\n\u003cp\u003eThe core is an RGB core, not a Neo pixel core. It is also not compatible with Galaxy's Edge blades. The core can be changed to multiple colors and different sound profiles. An instruction booklet will teach you how to change the volume, color, and sounds. A charging cord is also included. \u003c\/p\u003e\n\u003cp\u003eChoose if you want a core and a blade or any other combination. The core is battery powered and an RGB base lit display. It measures 187mm (7.25in) long and 25mm (1in) thick. The blade is 81.3cm (32in) long and 25mm (1in) thick. If you choose to provide any of your own pieces instead of buying mine, they must meet these dimensions. Also, look closely at the switch in my photos to make sure if matches your core as well. \u003c\/p\u003e\n\u003cp\u003eThis is not a combat-ready item. This item is intended to be used as a cosplay item. Using it for cosplay, role play or just swinging it around could break the item, so please be careful. I'm not responsible for the item breaking if you aren't using it responsibly. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested it before posting it to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, that this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Mystery Makers\u003cbr\u003e\nhttps:\/\/www.patreon.com\/mysterymakers\/posts\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"No Blade or Core \/ 0-No Stand","offer_id":44940105253023,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"No Blade or Core \/ 1-Desk Display","offer_id":44940105285791,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"No Blade or Core \/ 2-Desk Display","offer_id":44940105318559,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"No Blade or Core \/ 3-Desk Display","offer_id":44940105351327,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"No Blade or Core \/ 4-Desk Display","offer_id":44940105384095,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"No Blade or Core \/ 5-Wall Display","offer_id":44940105416863,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"No Blade or Core \/ 6-Wall Display","offer_id":44940105449631,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 0-No Stand","offer_id":44940105482399,"sku":"","price":85.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 1-Desk Display","offer_id":44940105515167,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 2-Desk Display","offer_id":44940105547935,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 3-Desk Display","offer_id":44940105580703,"sku":"","price":105.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 4-Desk Display","offer_id":44940105613471,"sku":"","price":105.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 5-Wall Display","offer_id":44940105646239,"sku":"","price":105.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 6-Wall Display","offer_id":44940105679007,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 0-No Stand","offer_id":44940105711775,"sku":"","price":85.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 1-Desk Display","offer_id":44940105744543,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 2-Desk Display","offer_id":44940105777311,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 3-Desk Display","offer_id":44940105810079,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 4-Desk Display","offer_id":44940105842847,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 5-Wall Display","offer_id":44940105875615,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 6-Wall Display","offer_id":44940105908383,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 0-No Stand","offer_id":44940105941151,"sku":"","price":115.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 1-Desk Display","offer_id":44940105973919,"sku":"","price":125.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 2-Desk Display","offer_id":44940106006687,"sku":"","price":125.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 3-Desk Display","offer_id":44940106039455,"sku":"","price":135.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 4-Desk Display","offer_id":44940106072223,"sku":"","price":135.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 5-Wall Display","offer_id":44940106104991,"sku":"","price":135.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 6-Wall Display","offer_id":44940106137759,"sku":"","price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.5415906817_8m8z.jpg?v=1768594155"},{"product_id":"baylan-skolls-lightsaber-ahsoka-79944","title":"Baylan Skoll’s Lightsaber | Ahsoka |  No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eBaylan Skoll's lightsaber had an orange-red blade. Skoll employed his lightsaber in his time as a mercenary, using it to cut down New Republic soldiers when he and his apprentice Shin Hati attacked the Vesper. Huyang, the architect droid who originally helped Skoll build his lightsaber, was later able to identify the owner by a hologram of the hilt -Wookiepedia \u003c\/p\u003e\n\u003cp\u003eUnscrew the middle and top parts to access the cyber crystal chamber. It will come with an orange kyber crystal. Please let me know if you want a different color crystal instead. \u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect (ridges, bumps and small holes are possible). Each piece is to be printed and glued separately in black, gray, red, and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D-printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested it before posting it to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, that this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from 3Demon\u003cbr\u003e\nhttps:\/\/3d-mon.com\/3d-model\/groupe\/male3dprintmodel\/baylan-skoll-lightsaber-ahsoka\/\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940106301599,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940106334367,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940106367135,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940106399903,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940106432671,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940106465439,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940106498207,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940106530975,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940106563743,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940106596511,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940106629279,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940106662047,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940106694815,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940106727583,"sku":"","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.5269779738_6h6v_aed9b34e-f632-44cf-9caf-1b37e3cddfc0.jpg?v=1768595107"},{"product_id":"sabine-wren-lightsaber-working-light-up-45948","title":"Sabine Wren Lightsaber | Working Light Up with Sound | Functional | No Paint Required | 3D Printed | Ahsoka | Ezra| Lightsaber Display Mount","description":"\u003cp\u003eThis is a real working light-up replica lightsaber based on Sabine Wren's lightsaber as seen in the Ahsoka show. Inside is an RGB core that lights up a blade like a flashlight. It even has sound!\u003c\/p\u003e\n\u003cp\u003eWhile this was orignally Ezra's saber, we now know that Sabine has been training with it and made it her own. \u003c\/p\u003e\n\u003cp\u003eThe hilt is 3D printed and assembled for you. Two screws hold the core in place. Unscrew the top emitter to gain access to the core for charging. \u003c\/p\u003e\n\u003cp\u003eA 1\" polycarbonate blade can be attached at the top. It is fair snug, but a separate contact screw is found in the emitter to tighten the blade into place. \u003c\/p\u003e\n\u003cp\u003eIf you order the version without the core or blade, it will come with cut out holes and places to put in a core yourself. This option is intended for those that already have the equipment. \u003c\/p\u003e\n\u003cp\u003eThe core is an RGB core, not a Neo pixel core. It is also not compatible with Galaxy's Edge blades. The core can be changed to multiple colors and different sound profiles. An instruction booklet will teach you how to change the volume, color, and sounds. A charging cord is also included. \u003c\/p\u003e\n\u003cp\u003eChoose if you want a core and a blade or any other combination. The core is battery powered and an RGB base lit display. It measures 187mm (7.25in) long and 25mm (1in) thick. The blade is 81.3cm (32in) long and 25mm (1in) thick. If you choose to provide any of your own pieces instead of buying mine, they must meet these dimensions. Also, look closely at the switch in my photos to make sure if matches your core as well. \u003c\/p\u003e\n\u003cp\u003e12' long and 1.5\" at its widest point. \u003c\/p\u003e\n\u003cp\u003eBridger spent several weeks building his lightsaber after receiving a kyber crystal in the Jedi Temple on Lothal. The weapon, which was built out of spare parts donated by fellow members of the Ghost's crew, was a lightsaber-blaster hybrid. When in lightsaber mode, the weapon had an adjustable blade and could be used in combat. Blaster mode was set to stun and was built as a result of Bridger's lack of skill in deflecting blaster fire with his blade. -Wookiepedia \u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in blue, brown, red black, and silver. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is not a combat-ready item. This item is intended to be used as a cosplay item. Using it for cosplay, role play or just swinging it around could break the item, so please be careful. I'm not responsible for the item breaking if you aren't using it responsibly. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Mystery Makers\u003cbr\u003e\nhttps:\/\/www.patreon.com\/mysterymakers\/posts\u003cbr\u003e\nRemixed parts from Brad Harris, CaseStudyno8\u003cbr\u003e\nhttps:\/\/www.thingiverse.com\/thing:3464910\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"No Blade or Core \/ 0-No Stand","offer_id":44940106989727,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"No Blade or Core \/ 1-Desk Display","offer_id":44940107022495,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"No Blade or Core \/ 2-Desk Display","offer_id":44940107055263,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"No Blade or Core \/ 3-Desk Display","offer_id":44940107088031,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"No Blade or Core \/ 4-Desk Display","offer_id":44940107120799,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"No Blade or Core \/ 5-Wall Display","offer_id":44940107153567,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"No Blade or Core \/ 6-Wall Display","offer_id":44940107186335,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 0-No Stand","offer_id":44940107219103,"sku":"","price":85.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 1-Desk Display","offer_id":44940107251871,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 2-Desk Display","offer_id":44940107284639,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 3-Desk Display","offer_id":44940107317407,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 4-Desk Display","offer_id":44940107350175,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 5-Wall Display","offer_id":44940107382943,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 6-Wall Display","offer_id":44940107415711,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 0-No Stand","offer_id":44940107448479,"sku":"","price":85.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 1-Desk Display","offer_id":44940107481247,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 2-Desk Display","offer_id":44940107514015,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 3-Desk Display","offer_id":44940107546783,"sku":"","price":105.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 4-Desk Display","offer_id":44940107579551,"sku":"","price":105.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 5-Wall Display","offer_id":44940107612319,"sku":"","price":105.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 6-Wall Display","offer_id":44940107645087,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 0-No Stand","offer_id":44940107677855,"sku":"","price":115.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 1-Desk Display","offer_id":44940107710623,"sku":"","price":125.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 2-Desk Display","offer_id":44940107743391,"sku":"","price":125.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 3-Desk Display","offer_id":44940107776159,"sku":"","price":135.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 4-Desk Display","offer_id":44940107808927,"sku":"","price":135.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 5-Wall Display","offer_id":44940107841695,"sku":"","price":135.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 6-Wall Display","offer_id":44940107874463,"sku":"","price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.5154747416_1vxm.jpg?v=1768594784"},{"product_id":"working-light-up-ezra-bridgers-61948","title":"Working Light Up Ezra Bridger's Lightsaber with Sound | No Paint Required | 3D Printed | Rebel Alliance | Lightsaber Display Mount Offered","description":"\u003cp\u003eThis is a real working light-up replica lightsaber based on Ezra Bridger's first lightsaber. \u003c\/p\u003e\n\u003cp\u003eThe hilt is 3D printed and assembled for you. Two screws hold the core in place and two halves of the saber together. Unscrew them to gain access to the core for charging. \u003c\/p\u003e\n\u003cp\u003eA 1\" polycarbonate blade can be attached at the top. It is fairly snug, but a separate contact screw is found in the emitter to tighten the blade into place. \u003c\/p\u003e\n\u003cp\u003eIf you order the version without the core or blade, it will come with cut out holes and places to put in a core yourself. This option is intended for those that already have the equipment. If you want a solid version that isn't electronically compatible, then order this item instead - https:\/\/www.etsy.com\/Super3DPrinter\/listing\/935120564\/ezra-bridgers-lightsaber-no-paint\u003c\/p\u003e\n\u003cp\u003eThe core is an RGB core, not a Neo pixel core. It is also not compatible with Galaxy's Edge blades. The core can be changed to multiple colors and different sound profiles. An instruction booklet will teach you how to change the volume, color, and sounds. A charging cord is also included. \u003c\/p\u003e\n\u003cp\u003eChoose if you want a core and a blade or any other combination. The core is battery powered and an RGB base lit display. It measures 187mm (7.25in) long and 25mm (1in) thick. The blade is 81.3cm (32in) long and 25mm (1in) thick. If you choose to provide any of your own pieces instead of buying mine, they must meet these dimensions. Also, look closely at the switch in my photos to make sure it matches your core as well. \u003c\/p\u003e\n\u003cp\u003eBridger spent several weeks building his lightsaber after receiving a kyber crystal in the Jedi Temple on Lothal. The weapon, which was built out of spare parts donated by fellow members of the Ghost's crew, was a lightsaber-blaster hybrid. When in lightsaber mode, the weapon had an adjustable blade and could be used in combat. Blaster mode was set to stun and was built as a result of Bridger's lack of skill in deflecting blaster fire with his blade. -Wookiepedia \u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in blue, brown, red black, and silver. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item or lite cosplay use. Using it for cosplay, role play or just swinging it around could break the item as it is not battle ready. I'm not responsible for the item breaking if you aren't just going to hold it gently, pose for pictures, and place it on a shelf. The blade is sturdy, but it is NOT meant to be swung against other sabers. \u003c\/p\u003e\n\u003cp\u003e9x6x2”\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:3464910\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"No Blade or Core \/ 0-No Stand","offer_id":44940111249567,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"No Blade or Core \/ 1-Desk Display","offer_id":44940111282335,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"No Blade or Core \/ 2-Desk Display","offer_id":44940111315103,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"No Blade or Core \/ 3-Desk Display","offer_id":44940111347871,"sku":"","price":105.0,"currency_code":"USD","in_stock":true},{"title":"No Blade or Core \/ 4-Desk Display","offer_id":44940111380639,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"No Blade or Core \/ 5-Wall Display","offer_id":44940111413407,"sku":"","price":105.0,"currency_code":"USD","in_stock":true},{"title":"No Blade or Core \/ 6-Wall Display","offer_id":44940111446175,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 0-No Stand","offer_id":44940111478943,"sku":"","price":100.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 1-Desk Display","offer_id":44940111511711,"sku":"","price":110.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 2-Desk Display","offer_id":44940111544479,"sku":"","price":110.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 3-Desk Display","offer_id":44940111577247,"sku":"","price":145.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 4-Desk Display","offer_id":44940111610015,"sku":"","price":110.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 5-Wall Display","offer_id":44940111642783,"sku":"","price":145.0,"currency_code":"USD","in_stock":true},{"title":"With Blade, No Core \/ 6-Wall Display","offer_id":44940111675551,"sku":"","price":110.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 0-No Stand","offer_id":44940111708319,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 1-Desk Display","offer_id":44940111741087,"sku":"","price":105.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 2-Desk Display","offer_id":44940111773855,"sku":"","price":105.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 3-Desk Display","offer_id":44940111806623,"sku":"","price":145.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 4-Desk Display","offer_id":44940111839391,"sku":"","price":105.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 5-Wall Display","offer_id":44940111872159,"sku":"","price":145.0,"currency_code":"USD","in_stock":true},{"title":"With Core, No Blade \/ 6-Wall Display","offer_id":44940111904927,"sku":"","price":105.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 0-No Stand","offer_id":44940111937695,"sku":"","price":130.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 1-Desk Display","offer_id":44940111970463,"sku":"","price":145.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 2-Desk Display","offer_id":44940112003231,"sku":"","price":145.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 3-Desk Display","offer_id":44940112035999,"sku":"","price":185.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 4-Desk Display","offer_id":44940112068767,"sku":"","price":145.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 5-Wall Display","offer_id":44940112101535,"sku":"","price":185.0,"currency_code":"USD","in_stock":true},{"title":"With Blade and Core \/ 6-Wall Display","offer_id":44940112134303,"sku":"","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.5049105325_6b2m_961fcc0d-744d-4764-9aae-12e129299fe4.jpg?v=1768593348"},{"product_id":"pong-krells-lightsaber-no-paint-79422","title":"Pong Krell's Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eA pair of lightsabers were owned and wielded by Pong Krell, a Besalisk Jedi Master who operated as a Jedi General during the Clone Wars. They were both double-bladed weapons, one of which was blue and the other green, and were able to fold down their middle for easier storage. -Wookiepedia\u003c\/p\u003e\n\u003cp\u003eChoose if you want a single pair or dual wielding pairs!\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in black, gold and silver. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. This saber is meant to be displayed in the open position. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003cbr\u003e\nhttps:\/\/www.thingiverse.com\/thing:2243381\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"1 Set Assembled \/ 0-No Stand","offer_id":44940114952351,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"1 Set Assembled \/ 1-Desk Display","offer_id":44940114985119,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"1 Set Assembled \/ 2-Desk Display","offer_id":44940115017887,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"1 Set Assembled \/ 3-Desk Display","offer_id":44940115050655,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"1 Set Assembled \/ 4-Desk Display","offer_id":44940115083423,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"1 Set Assembled \/ 5-Wall Display","offer_id":44940115116191,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"1 Set Assembled \/ 6-Wall Display","offer_id":44940115148959,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"1 Set Unassembled \/ 0-No Stand","offer_id":44940115181727,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"1 Set Unassembled \/ 1-Desk Display","offer_id":44940115214495,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"1 Set Unassembled \/ 2-Desk Display","offer_id":44940115247263,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"1 Set Unassembled \/ 3-Desk Display","offer_id":44940115280031,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"1 Set Unassembled \/ 4-Desk Display","offer_id":44940115312799,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"1 Set Unassembled \/ 5-Wall Display","offer_id":44940115345567,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"1 Set Unassembled \/ 6-Wall Display","offer_id":44940115378335,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"2 Sets Assembled \/ 0-No Stand","offer_id":44940115411103,"sku":"","price":95.0,"currency_code":"USD","in_stock":true},{"title":"2 Sets Assembled \/ 1-Desk Display","offer_id":44940115443871,"sku":"","price":105.0,"currency_code":"USD","in_stock":true},{"title":"2 Sets Assembled \/ 2-Desk Display","offer_id":44940115476639,"sku":"","price":105.0,"currency_code":"USD","in_stock":true},{"title":"2 Sets Assembled \/ 3-Desk Display","offer_id":44940115509407,"sku":"","price":105.0,"currency_code":"USD","in_stock":true},{"title":"2 Sets Assembled \/ 4-Desk Display","offer_id":44940115542175,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"2 Sets Assembled \/ 5-Wall Display","offer_id":44940115574943,"sku":"","price":105.0,"currency_code":"USD","in_stock":true},{"title":"2 Sets Assembled \/ 6-Wall Display","offer_id":44940115607711,"sku":"","price":105.0,"currency_code":"USD","in_stock":true},{"title":"2 Sets Unassembled \/ 0-No Stand","offer_id":44940115640479,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"2 Sets Unassembled \/ 1-Desk Display","offer_id":44940115673247,"sku":"","price":85.0,"currency_code":"USD","in_stock":true},{"title":"2 Sets Unassembled \/ 2-Desk Display","offer_id":44940115706015,"sku":"","price":85.0,"currency_code":"USD","in_stock":true},{"title":"2 Sets Unassembled \/ 3-Desk Display","offer_id":44940115738783,"sku":"","price":85.0,"currency_code":"USD","in_stock":true},{"title":"2 Sets Unassembled \/ 4-Desk Display","offer_id":44940115771551,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"2 Sets Unassembled \/ 5-Wall Display","offer_id":44940115804319,"sku":"","price":85.0,"currency_code":"USD","in_stock":true},{"title":"2 Sets Unassembled \/ 6-Wall Display","offer_id":44940115837087,"sku":"","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.4757770088_pz6j.jpg?v=1768593962"},{"product_id":"kit-fistos-lightsaber-no-paint-81347","title":"Kit Fisto's Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eThe Nautolan Jedi Master Kit Fisto utilized a green-bladed lightsaber during the Clone Wars against the Confederacy of Independent Systems. Fisto modified his lightsaber by using two crystals charged by an ignition pulse split into two currents, this allowed the beam to energize when fully submerged in water. This customization served him well when he was assigned to the watery battlefronts of Kamino and Mon Cala. -Wookiepedia \u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in black, red and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:2096213\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled \/ 0-No Stand","offer_id":44940115968159,"sku":"","price":44.99,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ 1-Desk Display","offer_id":44940116000927,"sku":"","price":54.99,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ 2-Desk Display","offer_id":44940116033695,"sku":"","price":54.99,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ 3-Desk Display","offer_id":44940116066463,"sku":"","price":54.99,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ 4-Desk Display","offer_id":44940116099231,"sku":"","price":54.99,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ 5-Wall Display","offer_id":44940116131999,"sku":"","price":54.99,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ 6-Wall Display","offer_id":44940116164767,"sku":"","price":54.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled \/ 0-No Stand","offer_id":44940116197535,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled \/ 1-Desk Display","offer_id":44940116230303,"sku":"","price":44.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled \/ 2-Desk Display","offer_id":44940116263071,"sku":"","price":44.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled \/ 3-Desk Display","offer_id":44940116295839,"sku":"","price":44.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled \/ 4-Desk Display","offer_id":44940116328607,"sku":"","price":44.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled \/ 5-Wall Display","offer_id":44940116361375,"sku":"","price":44.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled \/ 6-Wall Display","offer_id":44940116394143,"sku":"","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.6106188229_3kdn.jpg?v=1768594484"},{"product_id":"aayla-securas-lightsaber-no-paint-58574","title":"Aayla Secura's Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eThe Twi'lek Jedi Master Aayla Secura had a personal lightsaber by the time of the Clone Wars. The lightsaber produced a blue-blade when ignited and had a durasteel hilt.-Wookiepedia\u003cbr\u003e\nIt was likely lost during her execution from Order 66.\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect (ridges, bumps and small holes are possible). Each piece is to be printed and glued separately in black, gray and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:1722937\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940119605407,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940119638175,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940119670943,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940119703711,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940119736479,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940119769247,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940119802015,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940119834783,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940119867551,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940119900319,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940119933087,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940119965855,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940119998623,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940120031391,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.4162263162_ne8x.jpg?v=1768595029"},{"product_id":"jocasta-nu-lightsaber-no-paint-09121","title":"Jocasta Nu Lightsaber  | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eThough trained as a Consular Jedi and more of an academic than a warrior, Jocasta Nu still made a point of carrying her lightsaber if only as a symbol of authority. The lightsaber was usually concealed within her robes and kept well out of sight when she was working in the Archives. -Wookiepedia\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. It does NOT need to be painted. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in red, gold and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003cbr\u003e\nhttps:\/\/www.thingiverse.com\/thing:4699008\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940120162463,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940120195231,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940120227999,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940120260767,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940120293535,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940120326303,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940120359071,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940120391839,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940120424607,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940120457375,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940120490143,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940120522911,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940120555679,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940120588447,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.4000259621_m22o_e686358a-15ec-4ab2-9d24-bc6cb291fcc3.jpg?v=1768594603"},{"product_id":"grand-inquisitor-lightsaber-no-paint-07164","title":"Grand Inquisitor Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eHunt down those stinking Jedi with this Inquisitor lightsaber! While the blades don't rotate, the rings swing from one side to the other.\u003c\/p\u003e\n\u003cp\u003eThe Grand Inquisitor wielded his lightsaber against Emperor Palpatine's new apprentice, the Sith Lord Darth Vader. During their fight, Vader was able to damage the Inquisitor's lightsaber. The Inquisitor repaired the weapon and continued to use his lightsaber in the following years after Order 66 while hunting down surviving Jedi. -Wookiepedia\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. Choose if you want it assembled or not. Each piece is to be printed and glued separately in red, black, and silver. \u003c\/p\u003e\n\u003cp\u003eIf you order unassembled, expect a complicated build! Getting the swinging rings to work right takes a lot of patience. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eThis is a static only prop. It is not hollow and cannot accept any electronics or blades.\u003c\/p\u003e\n\u003cp\u003e14\"x6\"\u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003cbr\u003e\nhttps:\/\/www.thingiverse.com\/thing:1945665\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940121211039,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940121243807,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940121276575,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940121309343,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940121342111,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940121374879,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940121407647,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940121440415,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940121473183,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940121505951,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940121538719,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940121571487,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940121604255,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940121637023,"sku":"","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.3874901860_5vu3.jpg?v=1768594089"},{"product_id":"asajj-ventress-and-maul-lightsaber-dark-48736","title":"Asajj Ventress and Maul Lightsaber | Dark Disciple \u0026 Clone Wars Season 7 | No Paint Required | 3D Printed | Lightsaber Display Mount","description":"\u003cp\u003eVentress's lightsaber was designed by Will Nichols for the Star Wars: The Clone Wars television series. It was scheduled to appear in eight episodes starring Ventress and Quinlan Vos. The show was canceled, however, before the episodes were finished and the story was instead adapted into the novel Dark Disciple by Christie Golden. Nichols posted the concept design of the lightsaber in his portfolio in 2016.\u003c\/p\u003e\n\u003cp\u003eThe lightsaber's concept design was later used in the revived Season 7 of The Clone Wars, being used as half of Maul's lightsaber.\u003c\/p\u003e\n\u003cp\u003eMaul reforged the end of his original lightsaber into a second blade to create another double-bladed weapon which he used during his duel with Ahsoka Tano during the Siege of Mandalore. During the battle, Ahsoka caused him to drop both to the depths of the city-Wookiepedia\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. It does NOT need to be painted. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in black, red and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003e11\"x3\" for a single blade\u003cbr\u003e\n22\" for a double sided blade\u003cbr\u003e\n5 oz or 145 g\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:1677809\u003cbr\u003e\nhttps:\/\/www.thingiverse.com\/thing:4849038\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Single \/ 0-No Stand","offer_id":44940123472031,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Single \/ 1-Desk Display","offer_id":44940123504799,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Single \/ 2-Desk Display","offer_id":44940123537567,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Single \/ 3-Desk Display","offer_id":44940123570335,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Single \/ 4-Desk Display","offer_id":44940123603103,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Single \/ 5-Wall Display","offer_id":44940123635871,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Single \/ 6-Desk Display","offer_id":44940123668639,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Dual \/ 0-No Stand","offer_id":44940123701407,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Dual \/ 1-Desk Display","offer_id":44940123734175,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Dual \/ 2-Desk Display","offer_id":44940123766943,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Dual \/ 3-Desk Display","offer_id":44940123799711,"sku":"","price":85.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Dual \/ 4-Desk Display","offer_id":44940123832479,"sku":"","price":85.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Dual \/ 5-Wall Display","offer_id":44940123865247,"sku":"","price":85.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Dual \/ 6-Desk Display","offer_id":44940123898015,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Assembled S7+OG \/ 0-No Stand","offer_id":44940123930783,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Assembled S7+OG \/ 1-Desk Display","offer_id":44940123963551,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Assembled S7+OG \/ 2-Desk Display","offer_id":44940123996319,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Assembled S7+OG \/ 3-Desk Display","offer_id":44940124029087,"sku":"","price":85.0,"currency_code":"USD","in_stock":true},{"title":"Assembled S7+OG \/ 4-Desk Display","offer_id":44940124061855,"sku":"","price":85.0,"currency_code":"USD","in_stock":true},{"title":"Assembled S7+OG \/ 5-Wall Display","offer_id":44940124094623,"sku":"","price":85.0,"currency_code":"USD","in_stock":true},{"title":"Assembled S7+OG \/ 6-Desk Display","offer_id":44940124127391,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Single \/ 0-No Stand","offer_id":44940124160159,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Single \/ 1-Desk Display","offer_id":44940124192927,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Single \/ 2-Desk Display","offer_id":44940124225695,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Single \/ 3-Desk Display","offer_id":44940124258463,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Single \/ 4-Desk Display","offer_id":44940124291231,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Single \/ 5-Wall Display","offer_id":44940124323999,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Single \/ 6-Desk Display","offer_id":44940124356767,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Dual \/ 0-No Stand","offer_id":44940124389535,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Dual \/ 1-Desk Display","offer_id":44940124422303,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Dual \/ 2-Desk Display","offer_id":44940124455071,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Dual \/ 3-Desk Display","offer_id":44940124487839,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Dual \/ 4-Desk Display","offer_id":44940124520607,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Dual \/ 5-Wall Display","offer_id":44940124553375,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Dual \/ 6-Desk Display","offer_id":44940124586143,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled S7+OG \/ 0-No Stand","offer_id":44940124618911,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled S7+OG \/ 1-Desk Display","offer_id":44940124651679,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled S7+OG \/ 2-Desk Display","offer_id":44940124684447,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled S7+OG \/ 3-Desk Display","offer_id":44940124717215,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled S7+OG \/ 4-Desk Display","offer_id":44940124749983,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled S7+OG \/ 5-Wall Display","offer_id":44940124782751,"sku":"","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled S7+OG \/ 6-Desk Display","offer_id":44940124815519,"sku":"","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.3555358828_hs1r_5b619614-644b-4a56-ac31-586ee704af24.jpg?v=1768594180"},{"product_id":"count-dookus-lightsaber-no-paint-51139","title":"Count Dooku’s Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eThe former Jedi Master, who became Darth Tyranus and the political leader of the Separatist Alliance, handcrafted the weapon's unique hilt with a kyber crystal that emitted a red blade. As the apprentice of the Dark Lord of the Sith, Darth Sidious, Dooku used the Sith blade against his foes. -Wookiepedia\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:1571057\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940127043743,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940127076511,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940127109279,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940127142047,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940127174815,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940127207583,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940127240351,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940127273119,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940127305887,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940127338655,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940127371423,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940127404191,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940127436959,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940127469727,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.3226121880_p84v.jpg?v=1768593381"},{"product_id":"stellan-gios-lightsaber-from-the-high-24135","title":"Stellan Gios' Lightsaber from the High Republic | No Paint Required | 3D Printed | Galaxy's Edge | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eStellan Gios's lightsaber was a blue-bladed crossguard lightsaber owned by Jedi Master Stellan Gios. The lightsaber had a cylindrical silver-and-black hilt with golden accents. Just below the blade emitters, a physical crossguard was mounted, which was pushed out to support the smaller quillon beams when the lightsaber was ignited, but collapsed when the weapon was deactivated for greater portability.-Wookiepedia \u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect (ridges, bumps and small holes are possible). Each piece is to be printed and glued separately in black, matte gold and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003e14.5\"\u003cbr\u003e\n8oz\u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:4812209\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940131008671,"sku":"","price":53.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940131041439,"sku":"","price":63.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940131074207,"sku":"","price":63.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940131106975,"sku":"","price":63.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940131139743,"sku":"","price":63.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940131172511,"sku":"","price":63.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940131205279,"sku":"","price":63.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940131238047,"sku":"","price":44.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940131270815,"sku":"","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940131303583,"sku":"","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940131336351,"sku":"","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940131369119,"sku":"","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940131401887,"sku":"","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940131434655,"sku":"","price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.3891689225_20lb.jpg?v=1768594188"},{"product_id":"mace-windus-lightsaber-no-paint-54935","title":"Mace Windu's Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eMace Windu's lightsaber was a Jedi weapon constructed by Jedi Master Mace Windu following his appointment as a senior member of the Jedi High Council. One of the most distinctive lightsabers in the Jedi Order due to its amethyst plasma blade, Windu would carry this weapon into battle on multiple occasions during the Clone Wars in which he served as a Jedi General in the Grand Army of the Republic. The lightsaber was ultimately lost when it fell out a window during a confrontation between Windu and the Sith Lord Darth Sidious. -Wookiepedia\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. It does NOT need to be painted. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in black, gray, gold and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:1621514\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940131532959,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940131565727,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940131598495,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940131631263,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940131664031,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940131696799,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940131729567,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940131762335,"sku":"","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940131795103,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940131827871,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940131860639,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940131893407,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940131926175,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940131958943,"sku":"","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.3025819971_1wcm.jpg?v=1768594701"},{"product_id":"obi-wan-kenobis-ep-1-2-lightsaber-68545","title":"Obi-Wan Kenobi's Ep. 1 \u0026 2 Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars |Lightsaber Display Mount, Desk, or Wall","description":"\u003cp\u003eObi-Wan Kenobi's first lightsaber was the lightsaber constructed by and wielded by Obi-Wan Kenobi when he was a Padawan. It was based on the simple design of his master Qui-Gon Jinn's weapon. Kenobi lost this weapon during the Invasion of Naboo during a duel with the Sith Lord Darth Maul, who kicked it into a reactor shaft inside the Theed power generator. Obi-Wan would later build himself a replica of this weapon that he would wield as a Jedi Knight until the start of the Clone Wars, after which he would use a new lightsaber of a completely different design. -Wookiepedia\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. It does NOT need to be painted. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in black, gray and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003cbr\u003e\nRemix by UnimatrixRed\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:1205383\u003cbr\u003e\nhttps:\/\/www.thingiverse.com\/thing:3499730\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940134351007,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940134383775,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940134416543,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940134449311,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940134482079,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940134514847,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940134547615,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940134580383,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940134613151,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940134645919,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940134678687,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940134711455,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940134744223,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940134776991,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.3055671969_o0of_7a59e0f1-59d2-4c81-b205-b5b8c6cfe900.jpg?v=1768593170"},{"product_id":"ahsoka-tanos-clone-wars-lightsabers-76800","title":"Ahsoka Tano’s Clone Wars Lightsabers  | No Paint Required |3D Printed| Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eAhsoka's weapons were a single-bladed lightsaber with a green blade, which was later accompanied by a shoto lightsaber with a yellow-green blade that she built upon taking up Jar'Kai during the latter half of the war. She often wielded her weapons in an unorthodox reverse grip.\u003cbr\u003e\nShe abandoned the lightsabers for good after Order 66, in order to fake her death to the new Galactic Empire, before eventually replacing them with a pair of white lightsabers upon joining the nascent rebellion.-Wookiepedia \u003c\/p\u003e\n\u003cp\u003eThese sabers will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect (ridges, bumps and small holes are possible). Each piece is to be printed and glued separately in black, gray and silver. \u003c\/p\u003e\n\u003cp\u003eThis is NOT the bouquet version. If you want that version, please order it specifically from the right listing. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003e12.2\"\u003cbr\u003e\n8oz\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:1489838\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940136415391,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940136448159,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940136480927,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940136513695,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940136546463,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940136579231,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940136611999,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940136644767,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940136677535,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940136710303,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940136743071,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940136775839,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940136808607,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940136841375,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.2826061910_l5n3_25466cd7-de31-46c8-9862-9c63f88a8d68.jpg?v=1768594331"},{"product_id":"kanan-jarrus-lightsaber-no-paint-43694","title":"Kanan Jarrus' Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eKanan Jarrus' lightsaber was the personal two-piece lightsaber of Kanan Jarrus, a Padawan who survived the destruction of the Jedi Order and eventually served in the Rebellion against the Galactic Empire. -Wookiepedia \u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in black, gray and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:1489838\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Black Grip \/ 0-No Stand","offer_id":44940138512543,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Black Grip \/ 1-Desk Display","offer_id":44940138545311,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Black Grip \/ 2-Desk Display","offer_id":44940138578079,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Black Grip \/ 3-Desk Display","offer_id":44940138610847,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Black Grip \/ 4-Desk Display","offer_id":44940138643615,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Black Grip \/ 5-Walk Display","offer_id":44940138676383,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Black Grip \/ 6-Wall Display","offer_id":44940138741919,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Green Grip \/ 0-No Stand","offer_id":44940138774687,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Green Grip \/ 1-Desk Display","offer_id":44940138840223,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Green Grip \/ 2-Desk Display","offer_id":44940138872991,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Green Grip \/ 3-Desk Display","offer_id":44940138938527,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Green Grip \/ 4-Desk Display","offer_id":44940138971295,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Green Grip \/ 5-Walk Display","offer_id":44940139036831,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Green Grip \/ 6-Wall Display","offer_id":44940139069599,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Grn Hilt \/ 0-No Stand","offer_id":44940139135135,"sku":"","price":34.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Grn Hilt \/ 1-Desk Display","offer_id":44940139167903,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Grn Hilt \/ 2-Desk Display","offer_id":44940139233439,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Grn Hilt \/ 3-Desk Display","offer_id":44940139298975,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Grn Hilt \/ 4-Desk Display","offer_id":44940139331743,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Grn Hilt \/ 5-Walk Display","offer_id":44940139397279,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Grn Hilt \/ 6-Wall Display","offer_id":44940139462815,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Blk Hilt \/ 0-No Stand","offer_id":44940139495583,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Blk Hilt \/ 1-Desk Display","offer_id":44940139561119,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Blk Hilt \/ 2-Desk Display","offer_id":44940139626655,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Blk Hilt \/ 3-Desk Display","offer_id":44940139659423,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Blk Hilt \/ 4-Desk Display","offer_id":44940139724959,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Blk Hilt \/ 5-Walk Display","offer_id":44940139757727,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Blk Hilt \/ 6-Wall Display","offer_id":44940139823263,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.2867304791_qcgs.jpg?v=1768595137"},{"product_id":"ezra-bridgers-lightsaber-no-paint-20564","title":"Ezra Bridger's Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eBridger spent several weeks building his lightsaber after receiving a kyber crystal in the Jedi Temple on Lothal. The weapon, which was built out of spare parts donated by fellow members of the Ghost's crew, was a lightsaber-blaster hybrid. When in lightsaber mode, the weapon had an adjustable blade and could be used in combat. Blaster mode was set to stun and was built as a result of Bridger's lack of skill in deflecting blaster fire with his blade. -Wookiepedia \u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in black, gray and silver. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003e9x6x2”\u003cbr\u003e\n8oz\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:3464910\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940142870687,"sku":"","price":44.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940142903455,"sku":"","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940142936223,"sku":"","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940142968991,"sku":"","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940143001759,"sku":"","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940143034527,"sku":"","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940143067295,"sku":"","price":54.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940143100063,"sku":"","price":34.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940143165599,"sku":"","price":44.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940143198367,"sku":"","price":44.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940143263903,"sku":"","price":44.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940143296671,"sku":"","price":44.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940143329439,"sku":"","price":44.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940143362207,"sku":"","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.2867223453_kyel.jpg?v=1768594941"},{"product_id":"temple-guard-lightsaber-pike-no-paint-82768","title":"Temple Guard Lightsaber Pike | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eThe lightsaber pike was a thick, imposing lightsaber variant similar in design to the double-bladed lightsaber; in that it was a staff-shaped weapon that featured two rare and distinctive yellow plasma blades projecting from either end. -Wookiepedia\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. It does NOT need to be painted. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in gold, white, black, red and silver. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. This saber is meant to be displayed in the open position. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003cbr\u003e\nhttps:\/\/www.thingiverse.com\/thing:1085891\u003cbr\u003e\nRemixed by Mr Biscuit\u003cbr\u003e\nhttps:\/\/www.thingiverse.com\/thing:4315750\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940144148639,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940144181407,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940144214175,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940144246943,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940144279711,"sku":"","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940144312479,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940144345247,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940144378015,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940144410783,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940144443551,"sku":"","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.4809087465_6ghy.jpg?v=1768594610"},{"product_id":"ben-solos-lightsaber-no-paint-required-36491","title":"Ben Solo's Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eBen Solo's Jedi lightsaber originally had a blue colored blade. Like all Jedi lightsabers, Solo's had a kyber crystal at its core as a power source,[9] and contained a diatium power cell cradled within the grip as an additional power source. The blade was ignited using a sliding activation switch located near the top of the hilt.\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:2781424\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940144574623,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940144607391,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940144640159,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940144672927,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940144705695,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940144738463,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940144771231,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940144803999,"sku":"","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940144836767,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940144869535,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940144902303,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940144935071,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940144967839,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940145000607,"sku":"","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.2858036304_5zhr.jpg?v=1768594512"},{"product_id":"darth-sidiousemperor-palpatines-29007","title":"Darth Sidious\/Emperor Palpatine's Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge |Clone Wars|Lightsaber Display Mount Desk\/Wall","description":"\u003cp\u003eDarth Sidious had discerning tastes, which was reflected in his lightsabers. They were constructed from nearly indestructible phrik with a flat aurodium blade emitter, and all finished with electrum. Both weapons utilized a corrupted kyber crystal at their cores. -Wookiepedia\u003c\/p\u003e\n\u003cp\u003eOnly 1 saber is included in this purchase. This saber will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in Gold, gray and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003e7\"x3\"\u003cbr\u003e\n5 oz or 145 g\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:1667092\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940145655967,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940145688735,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940145721503,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940145754271,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940145787039,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940145819807,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940145852575,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940145885343,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940145918111,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940145950879,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940145983647,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940146016415,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940146049183,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940146081951,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.2796810652_ndl2.jpg?v=1768593802"},{"product_id":"ezra-bridgers-2nd-lightsaber-no-04208","title":"Ezra Bridger’s 2nd Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eFollowing the destruction of Ezra Bridger’s lightsaber by Darth Vader on Malachor, Bridger built a new lightsaber sometime between 3 BBY and 2 BBY. -Wookiepedia \u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in black, gray and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003e13x2”\u003cbr\u003e\n5 oz or 145 g\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:1809989\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940146770079,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940146802847,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940146835615,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940146868383,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940146901151,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940146933919,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940146966687,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940146999455,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940147032223,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940147064991,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940147097759,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940147130527,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940147163295,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940147196063,"sku":"","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.2745824678_kl0w_7f5ab115-52ec-49f6-9bc6-7f64f186f6c9.jpg?v=1768593177"},{"product_id":"cal-kestis-lightsaber-no-paint-98618","title":"Cal Kestis' Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eJaro Tapal constructed a double-bladed lightsaber. He had it on hand shortly before Order 66—a contingency order that forced all clone troopers to execute their Jedi superiors—was enacted, drawing it in defense of himself and his Padawan, Cal Kestis. Despite his efforts, Tapal’s considerable skill with the weapon was not enough to fend off the concentrated gunfire of numerous clones while simultaneously defending himself and his Padawan, and the lightsaber was damaged when a bolt sundered the weapon in two. Fatally wounded, Tapal gifted Kestis his lightsaber, knowing that Kestis had lost his own. -Wookiepedia\u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. The final product in person may appear slightly different in person. There is no weathering and colors may be brighter or duller than pictures. It is 3D printed, so it won't look perfect and may have bumps, ridges and lines. Each piece is to be printed and glued separately in black, gray and silver. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003e18\"x3\"\u003cbr\u003e\n5 oz or 145 g\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.thingiverse.com\/thing:4336828\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940147327135,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940147359903,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940147392671,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940147425439,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940147458207,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940147490975,"sku":"","price":55.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940147523743,"sku":"","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940147556511,"sku":"","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940147589279,"sku":"","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940147622047,"sku":"","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940147654815,"sku":"","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940147687583,"sku":"","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.3327067304_svx5.jpg?v=1768594220"},{"product_id":"yodas-lightsaber-no-paint-required-00382","title":"Yoda's Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eAfter constructing his lightsaber in Ilum, Yoda used this lightsaber multiple times throughout the Clone Wars. He nearly lost it in his battle against Darth Sidious. He kept it in his hut on Dagobah. It was later acquired by Luke Skywalker who kept it in his possession until he offered it to Grogu.-Wookiepedia\u003c\/p\u003e\n\u003cp\u003eSize matters not. Master Yoda knew how to wield this lightsaber with ease regardless of his stature. It will fit comfortably in your hand as well. \u003c\/p\u003e\n\u003cp\u003eThis saber will come in colored pieces. Choose if you want it assembled or not. It is 3D printed, so it won't look perfect. Each piece is to be printed and glued separately in black, gray and silver. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003e6\"x1\" or 150 cm x 30 cm\u003cbr\u003e\n2 oz or 56 g\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003cbr\u003e\nhttps:\/\/www.thingiverse.com\/thing:1866782\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled \/ 0-No Stand","offer_id":44940147753119,"sku":"","price":26.99,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ 1-Desk Display","offer_id":44940147785887,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ 2-Desk Display","offer_id":44940147818655,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ 3-Desk Display","offer_id":44940147851423,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ 4-Desk Display","offer_id":44940147884191,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ 5-Wall Display","offer_id":44940147916959,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Assembled \/ 6-Wall Display","offer_id":44940147949727,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled \/ 0-No Stand","offer_id":44940147982495,"sku":"","price":19.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled \/ 1-Desk Display","offer_id":44940148015263,"sku":"","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled \/ 2-Desk Display","offer_id":44940148048031,"sku":"","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled \/ 3-Desk Display","offer_id":44940148080799,"sku":"","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled \/ 4-Desk Display","offer_id":44940148113567,"sku":"","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled \/ 5-Wall Display","offer_id":44940148146335,"sku":"","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled \/ 6-Wall Display","offer_id":44940148179103,"sku":"","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.2715435112_9rhv.jpg?v=1768595144"},{"product_id":"leia-organas-colored-lightsaber-no-70408","title":"Leia Organa's Colored Lightsaber | No Paint Required | 3D Printed | Galaxy's Edge | Clone Wars | Lightsaber Display Mount on Desk or Wall","description":"\u003cp\u003eThe best Mother's Day gift! Give the saber of one of the best mother's this side of a galaxy far, far away!\u003c\/p\u003e\n\u003cp\u003e\"She surrendered her saber to me and said one day it would be picked up again by someone who would finish her journey.\"\u003cbr\u003e\n―Luke Skywalker, to Rey about Leia Organa's lightsaber\u003c\/p\u003e\n\u003cp\u003eThis beautiful lightsaber was used briefly by Leia Organa while being trained by her brother on Ajan Kloss. She surrendered her lightsaber to Luke after abandoning her Jedi training. After hers and Luke's deaths, Luke gave the lightsaber to Rey. \u003c\/p\u003e\n\u003cp\u003eThis saber will come assembled and colored. It is 3D printed, so it won't look perfect. Each piece is printed and glued separately in copper or silver. \u003c\/p\u003e\n\u003cp\u003eThis is NOT the bouquet version. If you want that version, please order it specifically from the right listing. \u003c\/p\u003e\n\u003cp\u003eThis item is intended to be used as a display item. Using it for cosplay, role play or just swinging it around could break the item. I'm not responsible for the item breaking if you aren't just going to hold it gently and place it on a shelf. \u003c\/p\u003e\n\u003cp\u003eIf you choose to get the display with the saber it will come in the appropriate color and\/or logo for the character. If you want something different, please let me know. \u003c\/p\u003e\n\u003cp\u003e11\"x2\"\u003cbr\u003e\n5 oz or 145 g\u003c\/p\u003e\n\u003cp\u003eDisplay stand not included, but available for purchase here-https:\/\/etsy.me\/3ow4rlZ\u003c\/p\u003e\n\u003cp\u003eThis is a 3D printed product, so there may be minor defects (rough edges, bumps, etc). It is all made of Biodegradeable Plastic. I have spent a lot of time calibrating my printers and I use the best printer and settings for the desired effect on each model. I use only the highest quality filament to ensure good quality and durability. \u003c\/p\u003e\n\u003cp\u003eI have printed everything in my shop and tested before posting to my store so that I can ensure that I maintain the quality that I expect. If the quality is not to my liking I will not ship it. \u003c\/p\u003e\n\u003cp\u003eI reserve the right to make minor updates to this item's design. So long as it does not radically change the intention of the product's use, your received item may look slightly different than in pictures. Color also may appear slightly different in pictures than the received item.\u003c\/p\u003e\n\u003cp\u003ePlease note, this is not affiliated with Star Wars in any way. \u003c\/p\u003e\n\u003cp\u003eDesigned and sold with permission from Brad Harris, CaseStudyno8\u003cbr\u003e\nhttps:\/\/www.thingiverse.com\/thing:4193911\u003c\/p\u003e","brand":"Super 3D Printer","offers":[{"title":"Assembled Saber \/ 0-No Stand","offer_id":44940148277407,"sku":"","price":34.99,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 1-Desk Display","offer_id":44940148310175,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 2-Desk Display","offer_id":44940148342943,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 3-Desk Display","offer_id":44940148375711,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 4-Desk Display","offer_id":44940148408479,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 5-Wall Display","offer_id":44940148441247,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Assembled Saber \/ 6-Wall Display","offer_id":44940148474015,"sku":"","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 0-No Stand","offer_id":44940148506783,"sku":"","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 1-Desk Display","offer_id":44940148539551,"sku":"","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 2-Desk Display","offer_id":44940148572319,"sku":"","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 3-Desk Display","offer_id":44940148605087,"sku":"","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 4-Desk Display","offer_id":44940148637855,"sku":"","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 5-Wall Display","offer_id":44940148670623,"sku":"","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Unassembled Saber \/ 6-Wall Display","offer_id":44940148703391,"sku":"","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0495\/4416\/7583\/files\/il_fullxfull.2763099087_flvd.jpg?v=1768593809"}],"url":"https:\/\/super3dprinter.com\/collections\/all-lightsabers.oembed?page=4","provider":"Super 3D Printer","version":"1.0","type":"link"}